How to set up a broadband wireless wifi connection?

Spread the love
How to set up a broadband wireless wifi connection?

Hello how do I set up a wireless internet connection, how do you set up wireless internet? I will demonstrate how to set up a broadband wireless router. How do I set up a wireless broadband router? Let’s start. I have a broadband wifi router. I will configure it for the internet.

broadband wireless Wi-Fi connection setup

You can see that it is already powered up. You can see the signal. This is the power signal. This is the Wi-Fi signal. You can see small signals when we connect the broadband connection, it lights up.

You can see the count of 1234. They are LAN port signals. You can see it is a yellow port. It is known as a WAN port. We connect the broadband connection here. My broadband connection is a black Ethernet cable terminated by the ISP.

With the rj45 connector, let me show you this broadband connection cable. Let’s plug this wire into the WAN port. This way you can see the LAN port. We connect the computer or laptop to the LAN port with an Ethernet cable. I have an Ethernet cable. Let me show you what you can see. This is the rj45 connector.

Connect broadband connection

We can connect it to any LAN port. This way the other end will be connected to the computer’s LAN port. You can see the small reset button. We use this button for the factory reset of the router. Just press this button for 5 to 10 seconds then we release it.

You can see the sticker below as the router automatically reboots and the router factory reset is complete as we release it. Can see the model number. dir 600 m default IP 192.168.0.1 I will use the web page from this IP address. You can see the credential Username ‘admin’ password ‘blank’ This is the MAC address. Let’s connect the Ethernet cable to the LAN port of the computer.

You can see the LAN port of the computer. I will connect the yellow Ethernet cable to the LAN port. You can see the gleaming lights on the LAN card. You can see the number 3. Lights I have connected the Ethernet cable to the third LAN port of the router. You can see the internet light up this means that a broadband link is coming. But we have to configure it for internet connection

Access web page

Let’s go to the computer screen and access the web page. First of all, check the IP address. You can not see any internet access Local area contact details You can see the IP address 192.168.0.2. Default Gateway 192.168.0.1 This is the default IP of the router I will log in to the web page with this IP address. You can see DHCP enabled.

By default, the DHCP server is enabled in a Wi-Fi router. Computers receive automatic IP. Note an option must be selected in the LAN card. Obtain an IP Address Automatically. Let’s type the IP address of the router. This is the web page. You can see that the computer is already connected to the router.

You can see the connection type DHCP, PPPoE, static I will set up PPPoE. The service provider has given me the username, password, I will type the username and password here. You can see said.

Username ‘admin’ password

This is the name of the Wi-Fi network. We can change this. This is the Wi-Fi password. Now I will not configure it. I prefer advanced network settings. Let me set the default DHCP for the settings. Click Save & Connect. This is the login page Default username ‘admin’ password Click ‘blank’ login.

Let’s open the setup Internet setup I’ll select PPPoE in wan access type. Let me type the username here. Kunjika service name is optional leave it blanks I will select continent in connection type.

This will be the default Click Apply changes Click Local Network. You can see the IP address 192.168.0.1. You can see by a default DHCP server is enabled you can see. This is from 2 to 254 I prefer 8.8.8.8 in DNS server 1 & 4.2.2.2 Changes to DNS server 2 Click Apply. Let’s open wireless. You can see ‘Enable SSID Broadcast’.

Can set up Wi-Fi password

It has been defaulted by default. SSID is the network name. Let me change it. You can keep auto in the channel. I channel no. 1 1 We can set up a Wi-Fi password in the security options. Select vape Authentication is automatic I will type the password in key1. There is a condition that the number must be 0 to 9. The letter must be from A to F. We cannot use special characters like @ # $ sign and if we select WPA PSK.

Type my password @ 123 Click on Apply Now, the Wi-Fi router is configured for the Internet. Step down Status Check You can see the link in the status. Read the post What and how Wi-Fi really works. Hindi post

PPPoE This is Internet IP. We are using a PPPoE connection. wireless is enabled by my pc support SSID encryption WPA channel 11 you can see internet access.

Let’s check Wi-Fi,

Let’s see if you can see that the internet is working. Check the Wi-Fi, I have already connected the USB wifi dongle, I have already disabled it. Let’s disable the local area connection. Enable it how to install wireless USB adapter you can go to my channel you can’t see connect just click on it it’s wi-fi network name just click and connect let’s type the password.

You can see the hidden character option if we click on it to hide the password right it is connected you can see the internet access. It is also showing the Wi-Fi network name. You can see my PC support here.

Let’s check the IP address

You can see the same issued IP address The same IP address was issued in the LAN card 192.168.0.2 & Default Gateway 0.1 DHCP is enabled This router can be configured as repeater mode.

How to configure link wifi router in repeater mode wireless wi-fi broadband connection setup in this post on my website I hope the post is interested pls like, share I will see you in next post thanks

Read the post:- Reliance Jio Wi-Fi JMR540 Wireless Data Card

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top